Close this search box.

Installation And Benefits Of Foam Pool Cove

Note: This post may contain affiliate links. This means that at no cost to you, we may receive a small commission for made purchases.

A foam pool cove is a product that can be used to protect the pool walls from damage caused by rough waves, as well as for providing an attractive appearance.

It is also known as foam pool decking or pool decking.

The benefits of using this type of material are many. For example, it will help keep your pool looking great all year round.

It will make cleaning easier because you won’t have to worry about getting rid of algae on the pool wall, and you will not need to use chemicals in order to clean your pool – apart from the regular chlorine.

In addition, it will provide protection against damage to your pool walls caused by rough waves.

So, let’s take a look at the benefits in more detail, and how to install a foam pool cove inside a swimming pool.

What Is A Pool Cove Used For?

A foam pool cove is a very useful product that can be installed into any type of swimming pool.

It provides a protective layer between the pool wall and the water, which prevents damage to the pool walls.

This means that it will prevent the formation of cracks and holes in the concrete pool walls.

This will allow for the smooth flow of water around the edges of the pool, and will reduce the amount of energy required to heat the water.

In addition, it will help to maintain the temperature of the water in the pool (see also ‘ What Is The Perfect Pool Water Temperature ?’).

Another benefit of installing a foam pool cove is that it will add an extra level of safety to your pool.

If there is a sudden change in weather conditions, the pool cove will offer a barrier between the pool wall and any debris that may fall into the pool.

Step-By-Step: How To Install A Foam Pool Cove

Installing a foam pool cove is easy. You just need to follow these simple steps:

Step 1: Removal Of Pool Liner 

Remove the old pool liner.

Step 2: Add In New Pool Liner

Add in a new pool liner and cut out the area where the new pool cove will go.

Step 3: Add Adhesive

Apply a thin coat of adhesive onto the pool wall.

Step 4: Add The Pool Cove To The Swimming Pool

Place the pool cove over the adhesive.

Step 5: Smooth It Down

Smooth down the pool cove with a putty knife.

Step 6: Let It Dry

Allow the adhesive to dry completely before applying another coat.

Step 7: Repeat Steps

Repeat Steps 3 through 6 until the entire pool cove has been applied.

Step 8: Clean The Excess

Clean up the excess adhesive with a damp cloth.

Step 9: Check It Is Working

Fill the pool with water and check if the pool cove floats properly.

Step 10: (Optional) Add Chlorine

Add chlorine to the pool if necessary.

Step 11: Enjoy!

Enjoy your new pool!

Benefits Of Using Foam Pool Coves

Benefits Of Using Foam Pool Coves

Foam pool coves provide several benefits.

They will help to protect your pool walls from damage caused due to rough waves, and they will help to keep your pool looking beautiful all year round.

They will also make cleaning much easier. The fact that they float makes them perfect for removing algae from the pool walls.

They will also help to maintain the temperature in your pool. Because they do not absorb heat like other materials, they will help to keep the water warm.

In addition, they will provide additional safety when there is a sudden change of weather.

When there is heavy rain or snowfall, the pool cove will protect your pool from falling objects.

Do You Need A Foam Pool Cove For An Above Ground Pool?

An above ground pool does not require a foam pool cove.

However, you should still consider installing one because it will help to protect your above ground pool from damage.

The only difference is that you would use a different kind of adhesive.

The adhesive used for an above ground pool would be more sticky than what is used for an in ground pool.

Is The Foam Durable?

Yes, the foam pool cove is very durable. It can withstand extreme temperatures and harsh chemicals.

However, if you are planning on using the pool cove as a swimming pool cover, then you might want to look at some other options.

A swimming pool cover (see also ‘How Do You Remove Rain Water Off Your Pool Cover?‘) is designed to protect the pool from dirt and leaves.

If you plan on using the pool cove for this purpose, then you should choose a thicker material.

How Much Does It Cost To Install A Foam Pool Cove?

The cost of installing a foam pool cover depends on the size of the swimming pool.

A small pool (see also ‘Small Plunge Pool Cost‘)can usually be covered for about $500. A large pool could cost as much as $1,000.

However, you can expect to spend less money by purchasing a prefabricated pool cove. These are available at most home improvement stores.

Are There Alternatives To A Pool Cove?

Yes, there are alternatives to a foam pool cove. One alternative is a vinyl pool cover.

Vinyl pool covers are made of polyethylene plastic. They can be placed on top of your existing pool liner.

However, they cannot be removed easily as a pool cove can. If you want to remove the pool cover, you have to tear off the whole thing.

This means that you will have to replace it again after every time you swim in the pool.

Another option is a floating pool cover. A floating pool cover is similar to a pool cove but it is designed to stay in place even during high winds. It works by using magnets.

You can buy a floating pool cover online at retailers like They come in two sizes: 24 inches wide x 60 inches long and 30 inches wide x 70 inches long.

Final Thoughts

The benefits of using foam pool coves are numerous. They will help to improve the appearance of your pool, and they will also help to protect your pool from damage.

If you want to find out more information about this topic, then please read our article on How To Build An Outdoor Swimming Pool.

author avatar
Anthony Barnes
Anthony Barnes is the founder of Water Heater Hub and a second-generation plumber by profession. Before developing Water Heater Hub, Anthony Barnes was a full-time plumber, and he has undertaken a wide variety of projects over the decades. As a second-generation plumber, it was easy for Anthony to get used to the technicalities of all from a tender age


On Key

Related Posts

Is Drano Bad for Pipes? The Truth Revealed

Note: This post may contain affiliate links. This means that at no cost to you, we may receive a small commission for made purchases. When it comes to dealing with clogged drains, many homeowners turn